Drive:

Proportionally controlled by RC kit, min. speed 10cm/sec, max. speed 40km/h. The option of automatic travel at a set speed, virtual, remotely adjustable safety endpoints with automatic smooth deceleration.

Gimbal:

DJI Ronin S, for cameras up to 3.6 kg, pan 360°, tilt 270°, roll 60°, max. speed 1s/360°. Control using the same RC kit as the drive.

Ropes:

Main rope: 100m  DYNEEMA  8mm (WLL  6900 kg).

Safety rope: 100m DYNEEMA 5mm (WLL  3000 kg).

​

Image transfer:

DJI, Vaxis, Hollyland or Teradek - up to 4k, 10bit, 4:2:2, no latency

The image transmission system is used according to the agreement and the intended use.

​

​

For the installation of the cablecam, it is necessary to secure anchor points with a horizontal tensile strength of min. 500kg, with mutual distance <100m. The safety end points of the movement must be set to min. 8 m from the anchor elements at the full speed of the cablecam (when using the full length of the 100 m rope, the travel distance is 84 m at maximum speed, up to 99 m at lower speeds).

​